Use the CLI commands in this topic to view health and status information about Email Security - Server appliance components. This topic describes selected commands that return system, hardware status, DTI network, and interface information. For a full list of commands and details about their usage and parameters, see the CLI Command Reference.
Monitor, Operator, or Admin access
Admin access for the
show ipmicommand
Note
The examples in this section are from a Network Security appliance, but they are representative of Trellix appliances as well.
To check appliance health:
Go to CLI enable mode:
hostname > enable
Display detailed information about the system and the software running on it.
hostname # show version Product name: Web MPS [licensed] Product model: FireEyeNX9450 Product edition: Classic Bandwidth: 2000 Mb Product release: wMPS (wMPS) 7.7.0.433916 Build ID: #433916 Build date: 2015-12-29 17:21:57 Build arch: x86_64 Built by: root@vta114 Version summary: wmps wMPS (wMPS) 7.7.0.433916 #433916 2015-12-29 17:21:57 x86_64 build@vta108:FireEye (xxx) Content Version: 385.314 Appliance ID: XXXXXXXXXXXX
Product model: FireEyeNX9450 Host ID: XXXXXXXXXXX System serial num: XXXXXXXXXX System UUID: XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX
Uptime: 3d 6h 34m 34.205s CPU load averages: 0.36 / 0.40 / .38 Number of CPUs: 32 System memory: 9210 MB used / 119984 MB free / 129194 MB total Swap: 0 MB used / 65536 MB free / 65536 MB total
Display the IPMI configuration:
hostname # show ipmi IPMI LAN Settings ---------------------------------------- Admin Shut Down : no Shut Down : no IP Address Source : Static Address IP Address : 192.168.42.27 Subnet Mask : 0 Default Gateway IP : 0
IPMI Firmware Installed ------------------------------- Firmware Version: 2.67 Device: 1 IPMI Version: 2.0
IPMI Firmware Available For Update ----------------------------------- New Firmware Version: 2.67 New Firmware Filename: FireEye_V267.bin Firmware Update Notice: Firmware is up to date for this release IPMI Firmware Availability Notice is enabled
Display overall system status:
hostname * show system health Overall system feature status: Good
Display current status of system and available services:
hostname # show show health all
Health Status:
Last Updated at: : 2019-11-06T20:31:00
Service: : System CPU/Memory/Disk IO Health
Health Status: : Healthy
Details: : Healthy
Service: : Global Cache
Health Status: : Healthy
Details: : Healthy
Display information about the Dynamic Threat Intelligence (DTI) network:
hostname # show fenet status
Dynamic Threat Intelligence Service:
Update source : <online> Enabled : yes Download : DTIUser@cloud.fireeye.com Upload : DTIUser@up-cloud.fireeye.com Mil : DTIUser@mil-cloud.fireeye.com HTTP Proxy:
Address : Username : User-agent :
Request Session:
Timeout : 30 Retries : 3 Speed Time : 60 Max Time : 14400 Rate Limit : Speed Limit : 1 Dynamic Threat Intelligence Lockdown:
Enabled : no Locked : no Lock After : 5 failed attempts
UPDATES Enabled Notify Scheduled Last Updated At ------- ------ --------- ------------------- Security contents: yes no every 2016/07/18 19:28:00 Stats contents: yes none 2016/07/18 15:55:00
Display status and traffic statistics for all interfaces:
hostname # show interfaces
Interface ether1 status: Comment: Admin up: yes Link up: yes DHCP running: no IP address: 172.00.00.00 Netmask: 255.000.0.0 IPV6 enabled: no Speed: 1000Mb/s (auto) Duplex: full (auto) Interface type: ethernet Interface ifindex: 12 Interface source: physical MTU: 1500 HW address: 00:25:90:D0:A3:76
RX bytes: 3114981133 TX bytes: 227921679 RX packets: 31934013 TX packets: 367951 RX mcast packets: 31564 TX discards: 0 RX discards: 296 TX errors: 0 RX errors: 1 TX overruns: 0 RX overruns: 0 TX carrier: 0 RX frame: 0 TX collisions: 0 TX queue len: 1000
Interface ether2 status: Comment: Admin up: yes Link up: no DHCP running: no IP address: Netmask: IPV6 enabled: no Speed: UNKNOWN Duplex: UNKNOWN Interface type: ethernet MTU: 1500 HW address: 00:25:90:D0:A3:77 RX bytes: 0 TX bytes: 0 RX packets: 0 TX packets: 0 RX mcast packets: 0 TX discards: 0 RX discards: 0 TX errors: 0 RX errors: 0 TX overruns: 0 RX overruns: 0 TX carrier: 0 RX frame: 0 TX collisions: 0 TX queue len: 0
Interface pether2 status: Comment: Admin up: yes Link up: no DHCP running: no IP address: Netmask: IPV6 enabled: no Speed: UNKNOWN Duplex: UNKNOWN Interface type: ethernet Interface ifindex: 9 Interface source: physical Bridge group: ether2 MTU: 1500 HW address: 00:25:90:D0:A3:77 RX bytes: 0 TX bytes: 0 RX packets: 0 TX packets: 0 RX mcast packets: 0 TX discards: 0 RX discards: 0 TX errors: 0 RX errors: 0 TX overruns: 0 RX overruns: 0 TX carrier: 0 RX frame: 0 TX collisions: 0 TX queue len: 1000
Interface pether3 status: Comment: Admin up: yes Link up: yes DHCP running: no IP address: 127.0.0.10 Netmask: 255.255.255.0 IPV6 enabled: no Speed: 1000 MB/s (auto) Duplex: full (auto) Interface type: ethernet Interface ifindex: 6 Interface source: physical MTU: 1500 HW address: 00:25:90:D0:A3:67 RX bytes: 31628620500 TX bytes: 0 RX packets: 46795 TX packets: 0 RX mcast packets: 367056 TX discards: 0 RX discards: 212322 TX errors: 0 RX errors: 0 TX overruns: 0 RX overruns: 0 TX carrier: 0 RX frame: 0 TX collisions: 0 TX queue len: 1000