When you connect your appliance to the network device, you can configure the appliance IP address and other parameters for integration in your network.
Configure each appliance with the required static IP addresses. If no IP addresses are specified, the appliance is configured with the default static IP addresses. The default gateway for the appliance uses the LAN 1 network. Configure any routing required on the OOB interface using static routes.
The hardware appliance has a Remote Management Module (RMM), which provides Lights Out Management functionality, such as remote KVM access and access to the appliance BIOS.
Connect a monitor, keyboard, and mouse to the appliance.
Connect the LAN 1 interface of the appliance to your network.
(Optional) Connect the fiber Small Form-Factor Pluggable (SFP) network interface card (NIC). Fiber SFP-10G-SR/LR (Short Range/Long Range) transceiver is a hot-pluggable module and can be inserted into or removed from a port without having to power down the appliance and connect using fiber optic cable. It is used as LAN1 port and Capture port 1 (Trellix DLP Network Monitor).
(Optional) Connect the OOB interface to a different network.
(Optional) Connect the RMM interface to a management network.
Tip
Use a closed or secure network for the RMM.