Use the default IP addresses rather than assigning dynamic IP addresses to configure each appliance.
LAN 1 — 10.1.1.108/24
Use the LAN 1 network for Trellix DLP Network Prevent SMTP or ICAP traffic. You can also use it for management traffic.
OOB — 10.1.3.108/24
(Optional) Use the Out-of-band (OOB) network for management traffic including ePO - On-prem communication.
Note
If your network uses DHCP, the first IP address that the DHCP server assigns to the appliance is used instead. You can manually configure the IP address from the Setup Wizard. The appliance doesn't support using a continuous DHCP configuration.
The default gateway for the appliance uses the LAN 1 network. Configure any routing required on the OOB interface using static routes.