Register the appliance with ePO - On-prem from the Setup Wizard

Choose the language for the Setup Wizard, then configure the basic network settings.

The wizard contains information to help you configure the settings.

1. On the Welcome page, select Basic Network Setup and click Next.

2. Complete the options on the Basic Settings page.

   Configure the Trellix DLP Network Monitor appliance as a standalone device or as a member of a cluster. For the appliance to be a member of a cluster, set it as a packet acquisition device (PAD) or as a dedicated scanner.

   Note

   Setting a cluster role causes a reboot when the changes are applied. Later, to change the cluster role, reset the appliance to factory defaults and apply the cluster role you want.

   It is recommended not to configure a Trellix DLP 8800, Trellix DLP 7700, or Trellix DLP 6600 hardware appliance model connected with the Trellix DLP Capture Storage Array (JBOD) as a Trellix DLP Network Monitor packet acquisition device. The Trellix DLP Capture Storage Array remains unused as the PAD doesn't scan and store capture data.

   Change the default password the first time you run the Setup Wizard and click Next.

   Note

   The new password must have at least eight characters. The default password is password.

3. Complete the options on the Network Services page, then click Next.

4. Review the information about the Summary page and make any corrections.

5. Click Finish.

   The initial network settings are applied. The first time you complete the Setup Wizard, or if you need to register with a new ePO - On-prem, the wizard restarts after the network settings are applied.

Register with ePO - On-prem.

1. Select Trellix ePolicy Orchestrator - On-prem Registration and click Next.

2. Complete the options in the Trellix ePolicy Orchestrator - On-prem Registration page using valid ePO - On-prem user credentials.

   You can choose any ePO - On-prem user to do the registration. ePO - On-prem administrator privileges are not required. The user name and password are not stored on the appliance after the registration is complete.

3. Click Finish.

Log on to ePO - On-prem.