Configures the User Principal Name (UPN) that is encoded in the Other Name field of the SAN field in the X.509 certificate.
Note
The default is the
x509-cert-san-upnattribute.
Note
Use the no aaa authentication certificate username command to reset the certificate field for the username.
For details about the user attributes for the X.509 certificate, refer to the "Configuring CAC for Certificate Authentication" appendix of the System Administration Guide.
Note
This command is not currently used on the Intelligent Virtual Execution - Server compute node.
Syntax
aaa authentication certificate username x509-cert-san-upn
no aaa authentication certificate username
Parameters
None
Example
The following example shows how to configure the UPN of the SAN field in the certificate.
hostname (config) # aaa authentication certificate username x509-cert-san-upn
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Central Management System: Release 7.9.1
Endpoint Security (HX): Release 2.5
Network Security: Release 7.9.1
Intelligent Virtual Execution - Server: Release 7.9.1
Email Security — Server: Release 7.9.0