Note
By default, when you create a bridge interface using the bridge command, the bridging is enabled.
Syntax
[no] bridge <interface>
Parameters
no
Disables the bridge interface.
interface
The interface to be used as a bridge.
Example
The following example enables bridging on ether1.
hostname (config) # bridge ether1 enable
The following example disables bridging on ether2.
hostname (config) # no bridge ether2 enable
User role
Admin and operator
Command mode
Config
Supported appliances
Malware Analysis: Before Release 6.4
Email Security — Server: Before Release 6.4
File Protect: Before Release 6.4
Network Security: Before Release 6.4
Intelligent Virtual Execution - Server: Release 7.9