Applies a profile of commands to a specific group of managed appliance.
Syntax
cmc profile <name> apply group <groupName>
Parameters
name
The name of the profile.
groupName
The name of the group.
Examples
The following example applies the banner profile to the EX-West group to change login messages on all appliances in the group.
hostname (config) # cmc profile banner apply group EX-West =================Appliance EX-04============================= Execution was successful. Execution output: Saving configuration file...Done!
The following example attempts to apply the "DateTimeJpn" profile to the Tokyo group, but fails because manual time and date settings are not permitted when NTP is enabled.
hostname (config) # cmc profile DateTimeJpn apply group Tokyo =================Appliance EX-05 ============================= Error code 6 (CLI command execution failure) Error output: %NTP enabled, clock adjustment not allowed Execution output: (none)
User role
Admin
Command mode
Config
Supported appliances
This command was released as follows:
Central Management System: Before Release 6.4.0