This command specifies an override to the default maximum packet capture duration used by the network deployment checking feature. To display the setting of the network deployment check duration, enter the show deployment check network command in enable mode.
Regardless of the packet capture duration, the maximum packet capture size is 100,000 packets.
For more information, see the Network Security System Administration Guide.
Note
You can also run this command remotely from the command line of an integrated FireEye Central Management System appliance using the central management appliance proxying mechanism.
Syntax
deployment check network duration seconds
Parameters
seconds
Maximum packet capture duration. The minimum value is 20. There is no maximum value. The default value is 120 seconds. The maximum capture amount is 100,000 packets.
Examples
The following example sets the upper limit for packet capture duration to 60 seconds.
hostname # deployment check network duration 60
The following example, executed on a Central Management System appliance, sets the upper limit for packet capture duration to 60 seconds on all managed Network Security appliances.
hostname # cmc execute appliance all command "deployment check network duration 60"
User role
Operator or Admin
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security:Release 7.4.0.