fenet dti enrollment service type ＜type＞ address ＜address＞ port ＜port＞

By default, the Central Management System appliance controls the enrollment service for managed sensors. When manual enrollment is required, the enrollment service type is DTI. Use this command to change the enrollment service type from CMS to DTI and to configure the enrollment service address.

You can also use this command to configure the Central Management System appliance in a private cloud to function as the enrollment server for sensors submitting to an MVX cluster in the private cloud. In this scenario, the enrollment service must be LOCAL.

Note

This is one of a series of commands used to configure DTI enrollment service settings. See the MVX documentation for details.

Syntax

fenet dti enrollment service type {DTI | LOCAL} address <address> port <port>

no fenet dti enrollment service type {DTI | LOCAL}

Parameters

no

Use the no form of the command to restore the default address. The default address is the managing Central Management System appliance address.

address

The hostname or IP address of the custom server.

port

(Optional) The port used for enrollment service requests. The default is port 443.

Example

The following example enrolls the nx-02 sensor that is managed by a Central Management System appliance with an IP address of 172.4.5.6 with a cluster that is managed by another Central Management System appliance with an IP address of 10.11.10.11.

nx-02 (config) # no fenet dti enrollment service override enable
nx-02 (config) # fenet dti enrollment service type DTI address 10.11.10.11
nx-02 (config) # fenet dti enrollment service default DTI

User role

Admin or Operator

Command mode

Config

Supported appliances

This command is supported on the following appliances running the specified releases or later: