Sets the triage extraction task timeout period. Triage extraction is an internal process that the Endpoint Security (HX) appliance performs on the raw triage data so the data is more easily displayed.
Caution
Do not run this command without the advice of a Trellix customer support representative.
Syntax
[no] hx server triage extraction timeout <seconds>
Parameters
noResets the triage extraction task timeout period to the default of 300 seconds (5 minutes).
task-timeout <seconds>Specify the number of seconds after which pending triage extraction requests time out. Valid values range from 0 through 86400 seconds (1 day). The default is 300 seconds (5 minutes). Specifying 0 removes the timeout period.
Example
The following example sets the triage extraction timeout to 14400 seconds:
hostname (config) # hx server triage extraction timeout 14400
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Endpoint Security (HX): Release 2.6