Configures the lo interface DHCPv6 client.
Syntax
<no> interface lo ipv6 dhcp client {enable|renew}
Parameters
no
Disables DHCPv6 client configuration.
enable
Enables DHCPv6 on this interface.
renew
Renews DHCPv6 lease for this interface.
Examples
The following example enables DHCPv6 on the lo interface:
hostname (config) # interface lo ipv6 dhcp client enable
The following example disables DHCPv6 on the lo interface:
hostname (config) # no interface lo ipv6 dhcp client enable
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Malware Analysis: Before Release 6.4
Central Management System: Before Release 6.4
Email Security — Server: Before Release 6.4
File Protect: Before Release 6.4
Network Security: Before Release 6.4
Intelligent Virtual Execution - Server: Before Release 6.4