Configures the pether2 interface speed.
Syntax
<no> interface pether2 speed { <speed> | 10 | 100 | 1000 | 10000 | auto }
Parameters
no
Freezes the interface speed.
speed
Specifies the interface speed. When the speed is set to auto, the duplex mode is also set to auto-negotiated. If the speed is set manually, the duplex mode is queried and set to the detected value. There are six options for speed:
<speed> (manual)
10 Mbps
100 Mbps
1000 Mbps
10000 Mbps
auto
Examples
The following example sets the interface speed to 10 Mbps:
hostname (config) # interface pether2 speed 10
The following example freezes the interface speed:
hostname (config) # no interface pether2 speed 10
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Malware Analysis: Before Release 6.4
Central Management System: Before Release 6.4
Email Security — Server: Before Release 6.4
File Protect: Before Release 6.4
Network Security: Before Release 6.4
Intelligent Virtual Execution - Server: Before Release 6.4