To specify whether a USB device is auto-mounted to the attached appliance, use the media usb mount enable command in configuration mode. The no form of this command disables auto-mounting on a USB device.
You must enable auto-mounting at the same time the USB device is attached. By default, auto-mounting is disabled. The first partition is mounted in the /media/usb1 directory. You can only auto-mount the first USB device. To unmount the USB device before it is disconnected, use the media usb eject command.
Syntax
[no] media usb mount enable
User role
Admin
Supported appliances
Command was introduced before Release 7.5.0.
Parameters
None
Example
The following example enables auto-mounting on the USB device to the attached appliance.
hostname (config) # media usb auto-mount enable