Configures the preferred MVX cluster name.
Note
Before you can enroll the appliance on an MVX cluster, you need to configure the connection between the appliance and the MVX Server. For more information, see the as described in the Distributed Network Security Cloud MVX Guide or Distributed Network Security IVX Smart Grid Guide.
Syntax
[no] mvx cluster enrollment-service preferred name <name>
Parameters
no
Use the no form of this command to remove the preferred name.
name
The cluster name to be shown.
Example
The following example adds the preferred name es1 to the enrollment server.
nx-1 (config) # mvx cluster enrollment-service preferred name es1
The following example removes the preferred name from the enrollment server.
nx-1 (config) # no cluster enrollment-service preferred name
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security: Release 7.9.0 (sensor)