Configures an accessible (public) IP address for a broker in an internal network behind a NAT gateway. Sensors enroll with and communicate with the broker using this IP address instead of the internal IP address that sensors cannot reach.
Note
In the
show mvx node statusandshow mvx node status fullcommand output, the accessible IP address is displayed in theBroker Rolesection, and the internal IP address is displayed in theNode informationsection.
Syntax
[no] mvx node broker public-address <publicIPAddress>
Parameters
publicIPAddress
The accessible IP address. This is the virtual NAT IP address and port that a network administrator maps to the Intelligent Virtual Execution - Server internal IP address and port 22.
no
Removes a configured accessible IP address from the broker.
Examples
The following example configures 172.2.3.4 as the accessible IP address for the vx-1 broker.
vx-1 (config) # mvx node broker public-address 172.2.3.4
The following example removes the accessible IP address from the vx-1 broker.
vx-1 (config) # no mvx node broker public-address
User role
Admin
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Intelligent Virtual Execution - Server: Release 8.1.0