Configures the cluster interface on Intelligent Virtual Execution - Server nodes in an MVX cluster.
Syntax
mvx node config cluster-if <interface>
no mvx node config cluster-if <interface>
Parameters
no
Use the no form of this command to clear the node's cluster interface.
interface
Name of the cluster interface.
Example
The following example configures ether1 as the MVX cluster interface:
vx-1 (config) # mvx node config cluster-if ether1
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Intelligent Virtual Execution - Server: Release 7.9.0