Enables sending an icmp-port-unreachable message to the sender for the relevant operational mode on the appliance interface.
Important
You must use the policymgr interface <port-pair-name> re-configure command for the changes to take effect.
Syntax
[no] policymgr interface <port-pair-name> drop udp icmpport-unreachable enable
Parameters
no
Use the no form of this command to disable sending an icmp-port-unreachable message to the sender for the relevant operational mode on the appliance interface.
<port-pair-name>
Designation (A or B) that is configured on the appliance interface.
Example
The following example enables sending a TCP reset message on the specified interface.
hostname (config) # policymgr interface A drop udp icmpport-unreachable enable
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security: Before Release 7.5