Press CTRL+K to open search

Setting the alert aging interval using the Web UI

  • Published on Sep 10, 2026
  • 1 minute(s) read
Prev Next
To set the alert aging interval using the Web UI:

  1. Log in to the Endpoint Security (HX) Web UI.

  2. Select Aging Settings on the Configure menu. The Aging Settings page appears.

  3. In the Indicator & Alert Aging box on the Aging Settings page, specify an aging interval in the Delete alerts after: box. Valid values range from 1 through 365 days. This sets and enables the aging interval.

  4. Click Save to save your changes.

Note

To restore default settings, click Reset to default, and then click Save. If you click Cancel, Endpoint Security (HX) will return settings to the most recently saved values.

:
Related articles
  • Setting the alert aging interval
    Endpoint Detection and Response with Forensics (EDRF) > Manage your workspaces > Configure Forensics workspace > Alert aging > Specifying alert aging settings > Setting the alert aging interval
  • Setting the alert aging interval using the Web UI
    Endpoint Detection and Response with Forensics (EDRF) > Manage your workspaces > Configure Forensics workspace > Alert aging > Specifying alert aging settings > Setting the alert aging interval
  • Set the indicator rule aging interval using the Web UI
    Endpoint Security (HX) > Endpoint Security (HX) Server 10.x User Guide > Configuration > Manage IOC rules > Indicator rule aging > Specify indicator rule aging settings > Set the indicator rule aging interval