show cmc ha nx

Displays the status of all Network Security High Availability (HA) pairs that are connected to this Central Management System appliance.

Note
For more information about Network Security HA, see the Network Security High Availability Guide.

Syntax

show cmc ha nx

Parameters

None

Example

The following example shows the status of all HA pairs configured on this Central Management System appliance.

hostname # show cmc ha nx
NX-HA Acme_East: nx-3 nx-4     Status: Degraded
    Comment:                         Eastern region NX pair
    Connected:                       yes
    Software version match:          yes
    Configuration match:             no
    GI image version match:          yes
    Security content version match:  yes
    NX health status OK:             yes
    System time in sync:             yes
    Peer id verified:                yes
    Hardware model match:            yes

NX-HA NXPair4:         Status: Degraded
    Comment:
    NX-HA pair is degraded because not all members
    are configured.

NX-HA IT_Pair: nx-06 nx-08     Status: OK
    Comment:                         
    Connected:                       yes
    Software version match:          yes
    Configuration match:             yes
    GI image version match:          yes
    Security content version match:  yes
    NX health status OK:             yes
    System time in sync:             yes
    Peer id verified:                yes
    Hardware model match:            yes

Output fields

The following table describes the output fields for this command.

Field	Description
Status	The status of the Network Security HA pair: OK—The pair is healthy. Degraded—The pair has one or more conditions that generate a critical or warning message. For a list of these conditions, see the Network Security High Availability Guide. Not Connected—At least one appliance is not connected to the Central Management System appliance.
Comment	Descriptive information about the HA pair, if available.
Connected	Whether both appliances in the HA pair are connected to the Central Management System appliance.
Software version match	Whether the same major and minor version of the Network Security software is running on both appliances.
Configuration match	Whether all required configuration settings match.
GI image version match	Whether the same version of guest images is installed on both appliances.
Security content version match	Whether the same version of security content is installed on both appliances.
NX health status OK	Whether both appliances are healthy.
System time in sync	Whether the system time is synchronized.
Peer id verified	Whether both appliances exchanged their IDs.
Hardware model match	Whether both appliances have the same hardware model.

User role

Admin, Monitor, or Operator

Command mode

Enable

Supported appliances

This command is supported on the following appliances running the specified releases or later:

Central Management System: Release 7.7
Network Security: Release 7.8.0