Displays detailed information about events after a specified date. This command returns the event information such as the event's type, occurrence time, interface, action, analysis type, and so on. The event records are listed in descending order by event ID.
Syntax
show events after <date> <time>
Parameters
date
Displays the events after this date. Date is specified in the format yyyy/mm/dd.
time
Displays the events after this time. Time is specified in the format hh:mm:ss.
Output fields
The following table describes the output fields for the show events after command. Fields are listed in the approximate order in which they appear in the output.
Field | Description |
|---|---|
Occurrence Time | Time that the event occurred. |
Interface | Type of interface that was active. |
Action | Type of action that was taken. The policy is specified in parentheses. |
Event Type | Type of event that was identified. |
Analysis Type | Type of analysis that is associated with an event. |
Trace ID | Specific trace job number that is associated with an event. |
Malware ID | Specific malware analysis job number. |
Source IP | IP address of the source. |
Destination IP | IP address of the destination. |
Source MAC | MAC address of the source. |
Destination MAC | MAC address of the destination. |
VLAN ID | Network VLAN job number that is associated with an event. |
Attacked Port | Port number that is associated with an attack. |
IP Protocol | Type of IP protocol that is used to transport the threat. |
Original Malware ID | If a malware sample is a duplicate of an original sample, the duplicate displays the information from the original malware analysis job number. |
PCAP URL | Packet capture (PCAP) link that is associated with an event. |
Event Page URL | Specific link that is associated with an event. |
Example
The following example displays detailed information about events after the specified date and time.
hostname # show events after 2015/10/01 15:30:00 Event 1634: Occurrence Time : 2015-10-01 08:30:09 PDT Interface : any Action : notified (default policy): 0 Event Type : checksum-match Analysis Type : Binary Analysis Trace ID : 334 Malware ID : 334 Source IP : 64.28.181.208 Destination IP : 2.212.63.220 Source MAC : 00:20:18:11:FF:47 Destination MAC : 02:5E:8B:DA:86:CF VLAN ID : 0 Attacked Port : 80 IP Protocol : tcp Original Malware ID : 0 Match Type : av-match Name : PUA.Packed.PECompact EDP Page URL : https://mil.fireeye.com/edp.php?sname=PUA.Packed.PECompact PCAP URL : https://172.16.146.84/event_stream/send_pcap_file?ev_id=1634 PCAP URL (TEXT) : https://172.16.146.84/event_stream/send_pcap_ascii?ev_id=1634 Event Page URL : https://172.16.146.84/event_stream/events?event_id=1634
User role
Admin, Operator, Monitor, or Analyst
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security: Before Release 7.5