Displays details about monitoring interfaces associated with IPS policies on an IPS-enabled Network Security appliance. The command output shows the names of monitoring interfaces on the appliance or the names of active IPS policies. For more information, see the Network Security IPS Feature Guide
This command is not supported onthe SmartVision Edition appliances, which are Network Security appliances with SmartVision edition appliance licenses. The SmartVision Edition sensor is also called Trellix Network Security, SmartVision Edition.
Note
You can also run this command remotely from the command line of an integrated FireEye Central Management System appliance using the central management appliance proxying mechanism.
Syntax
show ips interfaces
Parameters
None
Output fields
The following table describes the output fields for the command. Fields are listed in the approximate order in which they appear in the output.
Field Name | Description |
|---|---|
Interface | Identifier (A or B) of a monitoring interface that is associated with an IPS policy. |
Policy applied | Name of the IPS policy applied to the monitoring interface. |
Rule count | Number of IPS rules active on the monitoring interface. |
Example
show ips interfaces
hostname # show ips interfaces Interface : A Policy applied : Comprehensive Rule count : 6882 Interface : B Policy applied : myCustom1 Rule count : 1002
User role
Monitor, Analyst, Operator, or Admin
Command mode
Enable
Supported appliances
This command is supported on the following appliance running the specified release or later:
Network Security: Release 7.2.0