Displays configuration settings between the Network Security appliance and the Splunk Enterprise server.
Note
You cannot integrate a SmartVision Edition sensor with a Splunk Enterprise server. SmartVision Edition sensors do not support the Layer 7 Metadata Event Exporter feature.
Splunk Enterprise integration is not supported on the NX x3xx appliances and the NX 10000 appliance.
Syntax
show l7metadata-export config
Parameters
None
Output fields
The following table describes the output fields for the show l7metadata-export config command.
Field | Description |
|---|---|
Protocol | Whether the transport protocol used was UDP, TCP, or HTTPS. |
IP | The IPv4 address of the Splunk Enterprise server. |
Port | The port of the Network Security appliance used to initiate a connection with the Splunk Enterprise server. Valid values range from 1 to 65535. |
Authorization Header | The HTTPS event collector token generated on the Splunk Enterprise server. |
Example
The following example shows the configuration settings between the Network Security appliance and the Splunk Enterprise server:
hostname # show l7metadata-export config
l7metadata-export configuration Protocol: HTTPS IP: 10.10.10.1 Port: 8088 Authorization Header: 2f3f9f46-35b1-42b8-b769-f6f065cedfb6
User role
Admin or Operator
Command mode
Enable
Supported appliances
This command is supported on the following appliance running the specified release or later:
Network Security: Release 8.2