Displays the settings that you configured for live malware analysis and sandbox analysis.
Syntax
show malware config
Parameters
None
Output fields
The following table describes the output fields for the show malware config command. Fields are listed in the approximate order in which they appear in the output.
Field | Description |
|---|---|
Malware Analysis Mode Enabled | Whether malware analysis mode is enabled. |
Malware Download Timeout | Number of seconds after which the malware stops downloading. |
Malware Analysis VMs | Percentage of virtual machines (VMs) that are allocated for malware analysis. The percentage is always set to 100% on Malware Analysis appliances. |
Default Gateway | IP address of the default gateway for the ether2 network interface. |
External IP | External IP address for the ether2 port. |
Internal IP | Internal IP address. |
Name Server | IP address of the name server that is used for MVX guest images for the Domain Name System (DNS). |
Http Proxy | IP address of the HTTP proxy server. |
Force Data Interface For Prefetch | Prefetch option in live malware analysis. |
Sandbox Proxy URL | URL or the domain of the proxy server. |
Example
The following example displays the malware analysis settings:
hostname # show malware config
Malware Analysis Mode Enabled: yes
Malware Download Timeout : 120 (sec)
Malware Analysis VMs : 100 (percent)
Live Analysis Configuration
Default Gateway: 192.168.211.1
External IP: 192.168.211.129/24
Internal IP: 169.254.100.1/24
Name Server: 8.8.8.8
Http Proxy: 0.0.0.0:0
Force Data Interface For Prefetch: no
Sandbox Analysis Configuration
Sandbox Proxy URL: http://malware.repo.com
User role
Admin, Operator, Monitor, or Analyst
Command mode
Enable
Supported appliances
This command is supported on the following appliance running the specified release or later:
Malware Analysis: Release 7.5