Displays whether the SSL Session Log module is ready to collect statistics.
For details about how to enable or disable SSL session logging, see the "Managing the Connection Event Logs of the SSL Flows" section in the "Troubleshooting" appendix of the Network Security User Guide.
Syntax
show session-logger statusParameters
None
Output fields
The following table describes the output fields for the show session-logger status command. Fields are listed in the approximate order in which they appear in the output.
Field | Description |
|---|---|
Status | Whether the SSL Session Log module is enabled to generate logs on the Network Security appliance. |
Listening State | Whether the session log mechanism is ready to process requests. The "Listening State" line displays "Ready (but admin disabled)" to indicate that the SSL session log mechanism has been stopped by the administrator. |
Module Name | Name of the feature module. |
Example
The following example displays that the module is ready to collect statistics.
hostname # show session-logger status Status : enabled Listening State: Ready Module Name : Status ------------------------ ssl : OFF
User role
Admin
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security: Release 8.2.1.