Displays the average and peak CPU utilization, as well as the status and configuration for performance-based alarms.
Syntax
show stats alarm [alarm_id] [cpu_util_indiv [rate-limit] | disk_io [rate-limit] | fs_mnt [rate-limit] | intf_util [rate-limit] | memory_pct_used [rate-limit] | paging [rate-limit]]
show stats chd [chd_id] [cpu_util | cpu_util_ave | cpu_util_day | disk_device_io_hour | disk_io | fs_mnt_day | fs_mnt_month | fs_mnt_week | intf_day | intf_hour | intf_util | memory_day | memory_pct | paging | paging_day]
show stats cpu
show stats sample [cpu_util | disk_io | fs_mnt_bytes | fs_mnt_inodes | interface| intf_util | memory | paging]
Parameters
cpu_util | Displays average CPU utilization too high: percent utilization. |
cpu_util_ave | Displays CPU utilization average. |
cpu_util_day | Displays CPU utilization average per day. |
disk_device_io_hour | Displays storage device I/O read/write statistics for the last hour in bytes. |
disk_io | Displays status and configuration for excessive swapping of data in and out of memory (KB/sec). |
rate-limit | Displays Alarm Rate Limit statistics. |
fs_mnt | Displays the average and peak CPU utilization for the past hour. |
fs_mnt_bytes | Displays the average and peak file system usage in bytes. |
fs_mnt_day | Displays file system usage average per day, in bytes. |
fs_mnt_inodes | Displays the average and peak file system use of inodes. |
fs_mnt_month | Displays file system usage average per month, in bytes. |
fs_mnt_week | Displays file system usage average per week, in bytes. |
interface | Displays network interface statistics. |
intf_day | Network interface statistics aggregation per day, in bytes. |
intf_hour | Network interface statistics aggregation per hour, in bytes. |
intf_util | Displays status and configuration for CPU utilization alarms. |
memory | Displays status and configuration for excessive swapping of data in and out of memory. |
memory_day | Average physical memory usage per day, in bytes. |
memory_pct | Average physical memory usage percentage. |
memory_pct_used | Displays status and configuration for excessive swapping of data in and out of memory. |
paging | Displays paging activity and paging faults. |
paging_day | Displays paging activity and paging faults per day. |
Example
The following example shows whether any performance-based alarms have occurred.
hostname > show stats alarm
Alarm bad_char_count: ok
Alarm cpu_util_indiv (Average CPU utilization too high): ok
Alarm disk_io (Disk I/O per second too high): (disabled)
Alarm fs_mnt (Free filesystem space too low): ok
Alarm intf_util (Network utilization too high): (disabled)
Alarm memory_pct_used (Too much memory in use): (disabled)
Alarm paging (Paging activity too high): ok
hostname>
The following example shows the CPU utilization for the past day.
hostname > show stats alarm cpu_util_day
Alarm cpu_util_indiv (Average CPU utilization too high):
Enabled: yes
Alarm state: ok
Rising error threshold: 90 percent utilization
Rising clear threshold: 70 percent utilization
Rate limit bucket counts: { 5, 20, 50 } Rate limit bucket windows: { 3600, 86400, 604800 }
Current time: 2012/03/31 05:26:47
Last event time:
CPU 0:
Last reading taken at: 2012/03/31 05:26:44
Last read value: 0 percent utilization
Last rising error at:
Last rising clear at:
CPU 1:
Last reading taken at: 2012/03/31 05:26:44
Last read value: 0 percent utilization
Last rising error at:
Last rising clear at:
Supported Appliances
This command was released as follows:
Malware Analysis: Before Release 7.5.
Central Management System: Before Release 7.5.
Email Security — Server: Before Release 7.5.
File Protect: Before Release 7.5.
Endpoint Security (HX): Before Release 2.5.
Network Security: Before Release 7.5.