Displays information about the temperature, RAID, power, and fan for the appliance.
Syntax
show system hardware status {temperature | raid | power | fan}Parameters
temperature | Displays the appliance temperature, unit of measurement, and status. |
raid | Displays the overall RAID status and the status of each disk. |
power | Displays the overall power status and the status of each power module. |
fan | For each fan, displays the running speed, the unit of measurement, and the status. |
Examples
The following commands return status information about the hardware:
High-level status:
hostname (config) # show system hardware status
System hardware status summary:
Temperature: Good
Raid: Good
Power: Good
Fan: Good
Temperature:
hostname (config) # show system hardware status temperature
System Temperature:
Value: 31
Unit: Celsius
RAID disk:
hostname (config) # show system hardware status raid
Overall raid status: Good
Disk status:
Disk 0: Online
Disk 1: Online
Power supply:
hostname (config) # show system hardware status power
Overall power status: Good
Power Module:
Module 1:
Status: Good
Fans:
hostname (config) # show system hardware status fan
System Fan:
Fan 1:
Speed: 9216
Unit: RPM
Status: Ok
Fan 2:
Speed: 10404
Unit: RPM
Status: Ok
Fan 3:
Speed: 9216
Unit: RPM
Status: Ok
Fan 4:
Speed: 9216
Unit: RPM
Status: Ok
Fan 5:
Speed: 10404
Unit: RPM
Status: Ok
Supported appliances
This command was released as follows:
Endpoint Security (HX): Release 2.5