Shows the network information that is configured for the user accounts.
Note
For users with the Analyst and Auditor roles, this command only returns information about their own accounts.
Some user accounts are used internally and are not configurable.
A user with a reject user account is automatically locked out and is not associated with a role by default.
Syntax
show usernames network
show usernames networkParameters
None
Output fields
The following table describes the output fields of the show usernames network command.
Field | Description |
|---|---|
USERNAME | Name with which the user logs in to the appliance. |
FULL NAME | Full name of the specified user. |
VLAN | Virtual Local Area Network (VLAN) identifier that is configured for the user account (if applicable). |
SUBNET | Network portion of the IP address that is configured for the user account (if applicable). |
Example
The following example shows the configured network information for the current user accounts.
hostname # show usernames network USERNAME FULL NAME VLAN SUBNET admin System Administrator amy Amy Johnson analysis Malware Analysis User cmcrendv CMC Rendezvous User jose Jose Garcia 10.1.1.0/24 monitor System Monitor operator System Operator reject Reject User
User role
Admin, Operator, Monitor, Analyst, Auditor, api_analyst, api_monitor, or fe_services.
Command mode
Enable
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security: Before Release 7.5.0
Central Management System: Before Release 7.5.0
EX Series: Before Release 7.6.0
Malware Analysis: Before Release 7.7.0
File Protect: Before Release 7.7.0