Press CTRL+K to open search

Verify the installation

  • Published on Sep 9, 2026
  • 1 minute(s) read
Prev Next

You can verify if the software was installed successfully on an endpoint.

  • Check if these components exist:

    • An entry for Trellix Solidifier is added to the Programs menu.

    • The swin.sys file is added to the %SystemRoot%\Windows\System32\drivers location.

    • The Trellix Solidifier Service is added under Windows services.

    • Product-specific registry settings are created:

      • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\swin

      • HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\scsrvc

    • Additional files are placed in the installation directory. These files are internal to the product and should not be changed.

    • Solidcore_Installer.log and solidcore_setup.log files are created under %SYSTEMROOT%. You can view the log file contents to verify if errors occurred during the installation.

    • MPT installer log files: mac_mpt.etl and mac_mpt.log are created under %SYSTEMROOT%.

Related articles
  • Verify the installation
    Application Control and Change Control > Application and Change Control 8.x > Trellix Application and Change Control 8.4.x - Windows Installation Guide > Install software for the first time > Install the software in an unmanaged environment
  • Verify the upgrade on an unmanaged system
    Application Control and Change Control > Application and Change Control 8.x > Trellix Application and Change Control 8.4.x - Windows Installation Guide > Upgrade to a new software version > Upgrade the software in an unmanaged environment
  • Verify the upgrade on an unmanaged system
    Application Control and Change Control > Application and Change Control 8.x > Trellix Application and Change Control 8.3.x - Windows Installation Guide > Upgrade to a new software version > Upgrade the software in an unmanaged environment