This section describes how to send logs from Aerohive Access Point.
Prerequisites
Aerohive AP230 802.11ac Wireless AP Version 6.4r1
Aerohive Networks HiveManager Online 6.4r1
To enable syslog streaming on the Aerohive AP:
Log in to the Aerohive Networks Hive Manager.
Select Configuration > Advanced Configuration > Management Services > Syslog Assignments.
Click New and configure syslog streaming:
Syslog Server: Enter the IP address of the Trellix Comm Broker Sender.
Severity: Select Info.
Click Apply.
Click Save.
Click Network Policies and add the syslog configuration to the network policy you are using for your access points.