Helix Enterprise-enabled appliances automatically upload health reports to Helix Enterprise. Reports are uploaded at regular intervals and when certain health-related events (such as a license state change or a disconnection from a Central Management System appliance) occur.
The reports are uploaded every five minutes by default, but you can change the frequency. You can also manually upload reports immediately. Health reporting can be disabled, but it automatically resumes when the appliance is reloaded.
The following table describes the health reporting configuration and status information you can view on each appliance.
Field | Description |
|---|---|
Service | |
Enabled | Whether Helix Enterprise health reporting is enabled on the appliance. (Health reporting is enabled by default after Helix Enterprise mode is enabled on the appliance.) |
Path | The path to the URL that receives health status. |
Interval | How often health status is regularly reported. The default frequency is every five minutes. |
Client | |
Status ok | Whether the Helix Enterprise health reporting status is OK. |
Status description | A description of the health reporting status. |
Last uploaded at | The time and date when the appliance last uploaded the health status report. |
Admin access to enable or disable health reporting, change the upload interval, and upload reports immediately
Monitor, Operator, or Admin access to view health reporting configuration and status