Use the Enable NTP section of the Date and Time Settings page to configure NTP servers.
Note
The Intelligent Virtual Execution - Server appliance has a CLI and a Web UI. The recommended method for this configuration on a Intelligent Virtual Execution - Server appliance is through the Central Management System Web UI.
To configure NTP servers:
Click the Settings tab.
Click Date and Time on the sidebar.
Click Add NTP Server.
Enter the IP address or hostname of the NTP server that you want to use in the Add NTP Server box.
Click Add.
Repeat the previous three steps to add additional servers.
To synchronize the system time once with a selected NTP server, click Update next to the server entry.
The time is updated, and the needed adjustment is displayed in a message on the page.
To delete an NTP server, select the checkbox next to the server and then click Remove NTP Server.
File Protect (FX) > File Protect 11.x > File Protect 11.x System Administration Guide > Configuration > Date and time settings > NTP server configuration
.png "All_Settings_DateNTP_scap.PNG")