An AMI (Amazon Machine Image) is a template that contains the software configuration needed to deploy a virtual Central Management System appliance (known as an instance in AWS). The software configuration includes the operating system, application server, and applications that are needed to launch the instance.
The following table summarizes the steps to launch a Central Management System instance in Amazon Web Services (AWS).
Note
This document provides the basic steps for launching Trellix virtual appliances, and assumes familiarity with launching virtual machines in AWS. For comprehensive information, see the AWS documentation provided by Amazon.
Task | Description |
|---|---|
1. Launch the instance. | Some settings are defined by your system administrator. Other settings are required for the Central Management System instance. For instructions, see Launching a virtual CM instance on AWS. |
2. (Optional) Apply the activation code and configure the initial admin password for the appliance. | See Configuring the activation code and initial admin password. |
3. (If using a static IP address for the ether1 interface) Configure the IP address. | See Configuring a static IP address for the ether1 interface. NOTE: This step is required if you use a static IP address for the interface. If you use DHCP instead, make sure the lease is persistent to maintain the connection with the managed appliances. |
4. Perform the initial configuration of the appliance. | See Performing the initial CM configuration . CAUTION: In the "Primary IP address and masklen?" step of the configuration jump-start wizard, enter the same values you configured when you launched the instance on AWS. |
5. Optional: If you determine your instance is too small or too large for your needs, you can change the instance type. |