Enabling and disabling Trellix YARA rules using the CLI

Use the commands in this procedure to enable or disable Trellix YARA rules on your File Protect appliance. You cannot use the Web UI to configure YARA rules.

Prerequisites

An established connection between the File Protect appliance and the Internet.
Administrator or Operator access to the File Protect appliance.

To enable or disable Trellix YARA rules:

Go to CLI configuration mode.

hostname > enable
hostname # configure terminal

Enable the Trellix YARA rules.
- To enable the Trellix YARA rules:
```
hostname (config) # yara policy fe
```
- To disable the Trellix YARA rules:
```
hostname (config) # yara policy disable
```

Verify your configuration.

hostname (config) # show static-analysis config
.....
Yara Configuration
 Yara policy                          : fe 
.....

Save your changes.

hostname (config) # write memory
Saving configuration file ... Done!