An Azure image is shared or copied into your Azure subscription by Trellix. You use this image to create one or more NDR Console virtual appliances. This image must be in the same resource group in which you will create the NDR Console virtual appliance.
Note
This document provides the basic steps for launching Trellix appliances, and assumes familiarity with launching virtual machines in Azure. For comprehensive information, see the Azure documentation provided by Microsoft.
The examples in this chapter use the "westus" location. To use the commands in the examples with a different location, replace "westus" with your location.
Deployment checklist
The following checklist summarizes the steps to create an NDR Console virtual appliance in Microsoft Azure. The best way to create an NDR Console virtual appliance is by using the Azure CLI tool.
Task | Information | Done |
|---|---|---|
Planning | ||
Ensure that the required resources are created for your subscription. | This includes, but may not be limited to:
| |
Ensure that all prerequisites are met. | See Azure prerequisites. | |
Deployment | ||
1. Verify that the NDR Console image is available in your resource group. | See Verifying the availability of the image in your resource group. | |
2. Create a public IP address. | ||
3. Create network interfaces. | ||
4. Create a storage account for boot diagnostics. | ||
5. Create an NDR Console virtual appliance. | ||
Verification | ||
Verify that the NDR Console appliance is accessible using the public IP address. | ||
After deployment | ||
Complete the configuration. | See the NDR Console Product Guide. | |