Performing the Central Management HA initial configuration on Microsoft Azure

Enter activation code?

Enter the activation code for the appliance.

Hostname?

Enter the hostname for the appliance.

Admin password?

(Optional) Enter a new administrator password.

Confirm admin password?

Re-enter the new administrator password.

Enable remote access for 'admin' user?

Enter yes to enable the administrator to log in to the appliance remotely.

Use DHCP on ether1 interface?

Enter yes to use Dynamic Host Configuration Protocol (DHCP) to configure the appliance IP address and other network parameters.

Enable fenet service?

Enter yes to enable access to the DTI network. (If you enter no, the next three steps are skipped.)

Enable fenet license update service?

Enter yes to enable the licensing service to automatically download your licenses from the DTI network and install them. (If licenses are downloaded and installed successfully, the wizard skips the step that prompts for the product license key and the step that prompts for the security-content updates key.)

Sync appliance time with fenet?

Enter yes to synchronize the appliance time with the DTI server time. If you enabled the licensing service, synchronization prevents a feature from being temporarily unlicensed due to a time gap. The wizard makes three attempts to perform this step before it gives up and moves to the next step.

Update licenses from fenet?

Enter yes to download and install your licenses. The wizard makes three attempts to perform this step before it gives up and moves to the next step.

Enable NTP?

Enter yes to enable automatic time synchronization with one or more Network Time Protocol (NTP) servers. Enter no to manually set the time and date on the appliance. (This step is skipped if you entered yes in the "Sync appliance time with fenet?" step.) If you enter no, specify the time and date in subsequent steps.

Enable FaaS VPN?

Enter no.

Set time (<hh>:<mm>:<ss>)?

Enter the appliance time in Greenwich Mean Time (GMT) (UTC+0). (This step and the next step are skipped if you entered yes in the "Sync appliance time with fenet?" or "Enable NTP?" step.

Set date (<yyyy>/<mm>/<dd>)?

Enter the appliance date in Greenwich Mean Time (GMT) (UTC+0).

Enable IPv6?

Enter no.

Configure CM HA?

Enter yes.

Product license key?

Enter the product license key you obtained from Trellix, or press Enter to install a 15-day evaluation license. (This step and the next step are skipped if you entered yes in the "Enable fenet license update service?" step and if licenses were successfully installed as a result.)

CM HA uses ether1 as CM HA default interface. Do you want to change CM HA interfaces?

Enter no.

Configure this node as primary Central Management HA node?

Enter yes for the primary node.

Enter no for the secondary node.

Secondary node only:

CM HA primary node IP address?

Enter the "dummy" static IP address you assigned in Assigning a "Dummy" Static IP Address on page 1.

Secondary node only:

CM HA primary node admin account password?

Enter the password for the primary node's remote admin user.

Secondary node only:

Confirm CM HA primary node admin account password?

Re-enter the password for the primary node's remote admin user.