The management interface is the port through which an appliance is managed and administered. It is also the port through which integration of the Central Management System appliance and the Intelligent Virtual Execution - Server appliance is managed. With the single-port address type, the management interface is also the port through which a managed appliance requests and downloads software updates from the DTI network.
Initial settings need to be configured to set up the management interface and to allow access to the network, change the default administrator password, and so on.
Connect to the sensor through an SSH client.
At the login prompt, enter
admin.Do one of the following:
Use the
ssh -icommand to use the private key file to establish the SSH session. For example,ssh -i /path/<my-key-pair>.pem admin@<instance>. When prompted, change the password using theusername admin password <new password>command. You will be logged out. Log in again using the new password.At the password prompt, enter the initial password you configured in Configuring the activation code and initial Admin password.
Accept the license agreement. The configuration jump-start wizard begins.
Answer the wizard questions as described in the following table.
Important
Before you run the jump-start wizard, complete the procedure described in Configuring a static IP address for the ether1 interface.