This release of Trellix vIPS is to provide new features and enhancements on the Manager and Virtual IPS Sensor software.
Release parameters | Version |
|---|---|
IPS Manager software | 11.1.7.111 |
Signature Set | 11.10.22.7 |
Virtual IPS Sensor software | 11.1.7.111 |
Virtual Controller/Probe | 2.6.2 |
Trellix SSL Agent (For inbound SSL decryption using DHE/ECDHE ciphers) | 1.0.5 |
Caution
The IPS Manager no longer supports HTTP-based connection and can be accessed via HTTPS connection only. You need to manually enter https://<hostname or host-IP> on the supported browsers to access the Manager UI.
Note
If you have a 9.x Manager managing 9.x NTBA, you should consider upgrading 9.x Manager to 10.1 or 11.1. If you plan to upgrade the Manager to 11.1, you need to first upgrade it to 10.1.7.65 and then to 11.1.
Upgrade support
Upgrade paths for Manager software versions
Note
Before you start upgrading to the latest 11.1 Manager version, ensure that you do not change the timestamp and timezone values of the Manager.
Caution
The Manager software supports only TLS 1.2 ciphers for Manager and Sensor communication.
If you are currently using Sensor software version that supports TLS 1.0 and you upgrade your Manager software to 11.1.7.111, the communication between the Manager and Sensor will fail. Therefore, you must first upgrade the Sensor to a software version that supports TLS 1.2 and later upgrade your Manager to 11.1.7.111. Post this, you may upgrade the Sensor to 11.1.7.111. Please refer to KB96194 for more information and contact Trellix Support for assistance.
Windows-based Manager:
Version | Upgrade path to 11.1 |
|---|---|
10.1.7.4, 10.1.7.7, 10.1.7.29, 10.1.7.35, 10.1.7.40, 10.1.7.44, 10.1.7.50, 10.1.7.50.2, 10.1.7.55, 10.1.7.61, 10.1.7.65, 10.1.7.66.3, 10.1.7.66.11 | 11.1.7.111 |
11.1.7.3, 11.1.7.3.5, 11.1.7.26, 11.1.7.41, 11.1.7.41.2, 11.1.7.56, 11.1.7.71, 11.1.7.84, 11.1.7.97 | 11.1.7.111 |
Linux-based Manager:
Version | Upgrade path to 11.1 |
|---|---|
10.1.7.4, 10.1.7.7, 10.1.7.25 (Cloud), 10.1.7.29, 10.1.7.35, 10.1.7.40, 10.1.7.44, 10.1.7.50, 10.1.7.50.2, 10.1.7.55, 10.1.7.61, 10.1.7.65, 10.1.7.66 (Cloud), 10.1.7.66.3, 10.1.7.66.11 | 11.1.7.111 |
11.1.7.3, 11.1.7.3.5, 11.1.7.26, 11.1.7.41, 11.1.7.41.2, 11.1.7.56, 11.1.7.71, 11.1.7.84, 11.1.7.97 (ESXi and KVM), 11.1.7.98 (AWS and Azure) | 11.1.7.111 |
Note
After the upgrade, the Linux-based Manager reboots automatically. If it fails to reboot, check the installation logs for errors and reboot the Manager manually.
For all direct upgrades to 11.1.7.111, use the
IPSM_1117111_setup.bin Version 11.1.7.111upgrade file.Only Linux-based Manager upgrades are supported for all Public Cloud releases.
Upgrade paths for Sensor software versions
Virtual IPS Sensor software (IPS-VM600 and IPS-VM5000):
Caution
The Manager software supports only TLS 1.2 ciphers for Manager and Sensor communication.
If you are currently using Sensor software version that supports TLS 1.0 and you upgrade your Manager software to 11.1.7.111, the communication between the Manager and Sensor will fail. Therefore, you must first upgrade the Sensor to a software version that supports TLS 1.2 and later upgrade your Manager to 11.1.7.111. Post this, you may upgrade the Sensor to 11.1.7.111. Please refer to KB96194 for more information and contact Trellix Support for assistance.
Sensor models | Version | Upgrade path to 11.1 |
|---|---|---|
IPS-VM600 | 10.1.7.1, 10.1.7.42, 10.1.7.51, 10.1.7.65, 10.1.7.86, 10.1.7.96 , 10.1.7.123, 10.1.7.135, 10.1.7.155, 10.1.7.156 (Cloud) | 11.1.7.111 |
11.1.7.1, 11.1.7.22, 11.1.7.44, 11.1.7.56, 11.1.7.72, 11.1.7.81, 11.1.7.98 | 11.1.7.111 | |
IPS-VM5000 | 11.1.7.44, 11.1.7.56, 11.1.7.72, 11.1.7.81, 11.1.7.98 | 11.1.7.111 |
Important
Starting with the 11.1 Update 2 release, the minimum memory requirement for IPS-VM600 deployment on ESXi and KVM is 8 GB. Contact Trellix support for more information and assistance.
Note
If the Sensor is running on 10.1.7.123 or a later version of 10.1 and you plan to downgrade it to 10.1.7.86 or an older version, you need to first downgrade the Sensor to 10.1.7.96 and then downgrade it to an older version. Please refer to KB96194 and contact Trellix Support for further assistance.
Heterogeneous support
These versions of 11.1 Manager software can be used to configure and manage the following devices:
Device | Version |
|---|---|
NS-series Sensors (NS3100, NS3200, NS3500, NS5100, NS5200, NS7150, NS7250, NS7350, NS7100, NS7200, NS7300, NS7500, NS9100, NS9200, NS9300, NS9500 standalone and stack) | 10.1, 11.1 |
NS-series Sensors (NS3600, NS7600 and NS9600) NoteNS7600 and NS3600 Sensors have been introduced with the 11.1 Update 5 release, and NS9600 Sensor with the 11.1 Update 7 release. | 11.1 |
Virtual IPS for AWS and Azure (IPS-VM600) | 10.1, 11.1 |
Virtual IPS for KVM and ESXi server (IPS-VM600 and IPS-VM5000) NoteIPS-VM5000 and support for KVM have been introduced with 11.1 Update 2 release. | 10.1, 11.1 |
NTBA Appliances (T-600, T-1200) | 9.1 |
Virtual NTBA Appliances (T-VM, T-100VM, T-200VM) | 9.1 |
Integration support
Trellix IPS version 11.1 supports integration with the following product versions:
Product | Version supported |
|---|---|
Trellix Data Exchange Layer | 6.0.3 |
Trellix Endpoint Security | 10.7.0 |
Trellix ePolicy Orchestrator - On-prem | 5.10.0 Service Pack 1 Update 3 |
Trellix Global Threat Intelligence | Compatible with all versions |
Trellix Intelligent Sandbox | 5.2.0 and above |
Virtual Trellix Intelligent Sandbox | 5.2.0 and above |
Trellix Intelligent Virtual Execution - Server | 10.0.0, 9.1.4 |
Trellix Intelligent Virtual Execution Cloud | Version 24R4 |
Trellix Logon Collector | 3.0.11 |
Trellix Network Investigator (Appliance and Virtual) | 3.1.0 |
Trellix Threat Intelligence Exchange | 4.0.0 |
Note
Integration with any point product is not supported on public cloud deployments.