Scheduling automatic backups using the CLI

Use the commands in this section to schedule automatic backups for the database.

To configure the scheduled backup job:

Go to CLI configuration mode:

hostname > enable
hostname # configure terminal

Create the job by specifying the job ID.
```
hostname (config) # job <jobID>
```

Specify the sequence number for the scheduled backup job.

hostname (config) # job <jobID> command <sequenceNumber>

Use the backup profile command to specify the type of profile.

hostname (config) # job <jobID> command <sequenceNumber> "backup profile <profile>"

To schedule the backup job for the configuration database:

hostname (config) # job <jobID> command <sequenceNumber> "backup profile config"

To schedule the backup job for the Trellix appliance:

hostname (config) # job <jobID> command <sequenceNumber> "backup profile fedb"

To schedule the backup job for both the configuration database and the Trellix appliance:

hostname (config) # job <jobID> command <sequenceNumber> "backup profile config+fedb"

To schedule the backup job for the configuration database, Trellix appliance database, and detected data (malware, alerts, reports, and so on):
```
hostname (config) # job <jobID> command <sequenceNumber> "backup profile full"
```

Use the backup profile command to specify the location for the backup file.

hostname (config) # job <jobID> command <sequenceNumber> "backup profile <profile> to <backupLocation>"

To schedule the backup job to a local destination on the appliance:

hostname (config) # job <jobID> command <sequenceNumber> "backup profile <profile> to local"

To schedule the backup job on a remote server:

hostname (config) # job <jobID> command <sequenceNumber> "backup profile <profile> to <url>"

where <url> is the specified remote location using the following format:

scp://<username>:<password>@<hostname>/<remotePath>

To schedule the backup job to a USB drive on your local machine:

hostname (config) # job <jobID> command <sequenceNumber> "backup profile <profile> to usb"

Save your changes:
```
hostname (config) # write memory
```

To schedule automatic backups for the database:

Specify how often you want the backup job to run automatically.
- To schedule daily, enter the end date, start date, or time:
```
hostname (config) # job <jobID> schedule daily end date <yyyy/mm/dd>
```
```
hostname (config) # job <jobID> schedule daily start date <yyyy/mm/dd>
```
```
hostname (config) # job <jobID> schedule daily time <hh:mm:ss>
```
  The parameter values are as follows:
  - <yyyy/mm/dd> specifies the end or start date for the backup job.
  - <hh:mm:ss> specifies the time to start the backup job based on a 24-hour clock.
- To schedule monthly, enter:
```
hostname (config) # job <jobID> schedule monthly day-of-month <day>
```
  where <day> is the day of the month the backup should occur.
- To schedule once, enter:
```
hostname (config) # job <jobID> schedule once time <hh:mm:ss> date <yyyy/mm/dd>
```
  The parameter values are as follows:
  - <hh:mm:ss> specifies the time to start the backup job based on a 24-hour clock.
  - <yyyy/mm/dd> specifies the date to start the backup job.
- To schedule a backup that runs periodically on a schedule you define, enter the end and start date or time interval:
```
hostname (config) # job <jobID> schedule periodic end date <yyyy/mm/dd> time  <hh:mm:ss>
```
```
hostname (config) # job <jobID> schedule periodic start date <yyyy/mm/dd> time  <hh:mm:ss>
```
```
hostname (config) # job <jobID> schedule periodic interval <timeInterval>
```
  The parameter values are as follows:
  - <yyyy/mm/dd> specifies the end or start date for the backup job.
  - <hh:mm:ss> specifies the end or start time for the backup job based on a 24-hour clock.
  - <timeInterval> is specified in the format of "2h3m4s."
- To schedule weekly:
```
hostname (config) # job <jobID> schedule <frequency> weekly day-of-week <day>
```
  The <day> parameter is the day of the week the backup job is scheduled to occur. Valid values are sun (Sunday), mon (Monday), tue (Tuesday), wed (Wednesday), thu (Thursday), fri (Friday), and sat (Saturday).
- To specify a type of schedule, enter:
```
hostname (config) # job <jobID> schedule <type>
```
  where <type> is the type of schedule for the backup job. Valid values are:
  Value
  Description
  once
  The backup runs only once
  daily
  The backup runs daily
  weekly
  The backup runs weekly
  monthly
  The backup runs monthly
  periodic
  The backup runs automatically on a schedule you define
Enable the configuration for the scheduled backup job.
```
hostname (config) # job <jobID> enable
```
Save your changes:
```
hostname (config) # write memory
```

Value	Description
`once`	The backup runs only once
`daily`	The backup runs daily
`weekly`	The backup runs weekly
`monthly`	The backup runs monthly
`periodic`	The backup runs automatically on a schedule you define

Verify the status for the scheduled backup job. For example:

hostname (config) # show job
 
Job 333:
   Status:              pending
   Enabled:             yes
   Continue on failure: no

   Schedule type:       daily
   Time and date:       2016/08/16 00:00:00 +0000

   Last exec time:      N/A
   Next exec time:      Sun 2016/08/17 00:00:00 +0000
   Commands:
      Command 1: backup profile config to local