Use the top section of the Date and Time Settings page to set the date and time for your Central Management System appliance.
Note
The Intelligent Virtual Execution - Server appliance has a CLI and a Web UI. The recommended method for this configuration on a Intelligent Virtual Execution - Server appliance is through the Central Management System Web UI.
.png "All_Settings_DateManual_scap.PNG")
Important
NTP synchronization is set by default and must be disabled before you can manually configure the date and time. For instructions about disabling NTP, see NTP server configuration .
Note
If you manually configure the time of Endpoint Security (HX) servers, be sure the server times of all your Endpoint Security (HX) servers are synchronized. A number of Endpoint Security (HX) services (including PKI services and transport layer security services) require that the dates and times of your Endpoint Security (HX) servers be accurate and synchronized within five seconds of each other. If you use NTP synchronization, the dates and times of your Endpoint Security (HX) servers will be synchronized automatically.
Admin access
Click the Settings tab.
Click Date and Time on the sidebar.
Select the date and time from the drop-down lists.
Click Update Time.
Set the time zone as described in Time zone configuration .