The Trellix Network Security 10.0.0 release requires a reboot for the update to take effect. You can upgrade your NX appliance to 10.0.0 from release 9.0.0 or later.
IPMI and BIOS firmware updates are required for the NX 2550 model. See the section "Upgrading IPMI 3.11 and BIOS 1.9 Firmware for Specific Platforms" below
Note
After an upgrade to version 10.0.0, certain processes will be in a pending state until new security content is downloaded and installed. See the following section, "Download the security content bundle".
Caution
If your Network Security appliance is running in CC-NDcPP compliance mode and the Web Server CA certificate (or one of the supplemental CA trust certificates added to the configuration) expires, the configuration database will fail to commit when the appliance is rebooted, resulting in a nonrecoverable error. If this happens, reset the appliance to factory default settings.
Note
Submissions from NX configured in hybrid mode will no longer be sent to Cloud MVX.
NX appliances configured in hybrid mode will offload overflow submissions to the connected on-prem cluster.