Using SFTP, you can upload supported file types to the FTP server on Intelligent Sandbox.
Your user name has FTP Access privilege. This is required to access the FTP server hosted on Intelligent Sandbox.
You have created the required analyzer profile that you want to use.
You have installed an FTP client on your machine.
Note
By default, FTP is not a supported protocol for uploading samples. To use FTP to upload files, you must enable it using the set ftp enable CLI command.
Open your FTP client and connect to Intelligent Sandbox using the following information.
Host — Enter the IP address of Intelligent Sandbox
User name — Enter your Intelligent Sandbox user name
Password — Enter your Intelligent Sandbox password
Port — Enter 22, which is the standard port for SFTP. For FTP, enter 21.
Upload the files from the local site to the remote site, which is on Intelligent Sandbox.
Log on to the Intelligent Sandbox web interface.
Click → and monitor the status of the uploaded files.