Displays the blacklisted DNS traffic (blat) configuration and stats.
This command is not supported on SmartVision Edition appliances, which are Network Security appliances with SmartVision Edition licenses. The SmartVision Edition sensor is also called Trellix Network Security, SmartVision Edition.
Syntax
show blat {configuration | stats}
Parameters
None
Examples
The following example displays the blat configuration.
hostname # show blat configuration BLAT Enabled : yes
The following example displays the blat stats.
hostname # show blat stats Packet received :197292 Static rules :28319 Dynamic rules :0 Inactive rules: 0 Blacklist IP rules :0 Static bad rules :0 Dynamic bad rules :0 Events reported :49 Static :49 Static (tcp) :0 Dynamic :0 Events dropped :0 Inline dropped :0 Inactive domain captured :60 Blacklist IPs submitted :0
Output fields
The output fields for the show blat stats command are described below.
Packet received | Total number of packets received by blat. |
Static rules | Total number of static rules in the rule file. |
Dynamic rules | Total number of dynamic rules added. |
Inactive rules | Total number of inactive rules. |
Blacklist IP rules | Total number of rules that blacklist IP addresses. |
Static bad rules | Total number of static rules that have an error in them. |
Dynamic bad rules | Total number of dynamic rules that have an error in them. |
Events reported | Total number of events and alerts reported. |
Events dropped | Total number of events and alerts dropped. |
Inline dropped | Total number of inline packets dropped. |
Inactive domain captured | Total number of inactive DNS domains captured. |
Blacklist IPs submitted | Total number of blacklisted IP addresses seen. |