show snmp

Displays the current SNMP configuration.

Note

To enable SNMP communities or multiple communities or to enable the sending of SNMP notifications (traps and informs) from this system, see snmp-server . To specify which events will be sent as SNMP notifications, see snmp-server notify event .

Syntax

show snmp [engineID | events | host | user]

Parameters

engineID

(Optional) Displays the engine ID of the local system

events

(Optional) Displays a list of events for which SNMP traps will be sent.

host

(Optional) Displays a list of notification sinks.

user

(Optional) Displays the SNMP v3 user security settings.

Examples

The following example shows the basic SNMP configuration:

hostname # show snmpSNMP enabled:         yes
SNMP port:            161
System contact:
System location:

Read-only communities: (DISABLED)
	QNBNkAa-5539GZm-D-qbf-S103-Ft79_

Interface listen enabled: no
No Listen Interfaces.

The following example shows the SNMP engine ID of the local system:

hostname # show snmp engineIDLocal SNMP engineID: 0x800063fd04303032353930383735344530

The following example shows the default list of events for which a Central Management System appliance sends SNMP traps:

hostname # show snmp eventsEvents for which traps will be sent:
  aggregation-failure: Alert aggregation failed for one or more sensors
  cmc-status-failure: The CMC has detected an error in a managed appliance
  disk-space-low: Filesystem free space has fallen too low
  disk-space-ok: Filesystem free space is back in the normal range
  dupe-appliance-detected: A duplicate virtual appliance detected
  excessive-temperature: Excessive temperature has reached.
  fan-failure: A fan has failed.
  fan-recover: A fan has recovered.
  gi-low-disk-download-failed: GI download failed
  interface-down: An interface's link state has changed to down
  interface-up: An interface's link state has changed to up
  license-state-changed: A license state has changed.
  manual-failover: A manual fail-over on CMS-HA has occurred.
  mvx-cluster-state-changed: MVX health check failed
  mvx-cluster-util-threshold-exceeded: MVX cluster utilization has exceeded threshold.
  normal-temperature: Temperature is normal.
  nxha-health-failure: NX-HA health check failed.
  physical-disk-failure: A physical disk has failed.
  physical-disk-recover: A physical disk has recovered.
  power-supply-failure: A power supply has failed.
  power-supply-recover: A power supply has recovered.
  process-crash: A process in the system has crashed
  raid-status-failure: A RAID error has occurred.
  raid-status-recover: A RAID has recovered.
  security-update-failure: Security update has failed.
  snmp-authtrap: An SNMP v3 request has failed authentication
  syslog-rotation: System log files rotation
  token-server-reachable: Token Server is reachable
  token-server-unreachable: Token Server is unreachable
  token-state-change: Virtual appliance activation state is changed
  unexpected-failover: An unexpected fail-over on CMS-HA has occurred.
  user-login: A user has logged into the system
  user-logout: A user has logged out of the system.

The following example shows the list of notification sinks:

hostname # show snmp host
Notifications enabled:           no
Default notification community:  S9V_J6P-__033r-Cf8_-xeI-uRsl47_V
Default notification port:       162

The following example shows the SNMP v3 user security settings:

hostname # show snmp user
User name: admin
  Enabled overall:         yes
  Authentication type:     sha
  Privacy type:            aes-128
  Authentication password: (NOT SET; user disabled)
  Privacy password:        (NOT SET; user disabled)
  Require privacy:         yes

User role

Admin, Analyst, or Operator.

Command mode

Enable

Supported appliances