Sets the bridge priority. This priority is used to determine signal path. A lower number represents a higher priority.
Syntax
[no] bridge <interface> priority <priority>
Parameters
no
Sets the bridge priority at the default value.
priority
The priority value.Range: -1 to 65535
Example
The following example sets ether1's bridge priority to 60.
hostname (config) # bridge ether1 priority 60
The following example resets ether2's bridge priority to the default value.
hostname (config) # no bridge ether2 priority
User role
Admin and operator
Command mode
Config
Supported appliances
Malware Analysis: Before Release 6.4
Email Security — Server: Before Release 6.4
File Protect: Before Release 6.4
Network Security: Before Release 6.4
Intelligent Virtual Execution - Server: Release 7.9