Sets the bridge-group priority of the interface.
Syntax
<no> interface <interface name> bridge-group <bridge group> priority <priority>
Parameters
no
Resets the bridge-group priority value to the default.
interface name
The interface to be used as a bridge.
bridge group
The name of the bridge group.
priority
The bridge-group priority value
Range: -1 to 255.
Examples
The following example sets the bridge-group priority to 10:
hostname (config) # interface ether1 bridge-group A priority 10
The following example resets the bridge-group priority to 10:
hostname (config) # no interface ether2 bridge-group A priority 10
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Malware Analysis: Before Release 6.4
Central Management System: Before Release 6.4
Email Security — Server: Before Release 6.4
File Protect: Before Release 6.4
Network Security: Before Release 6.4
Intelligent Virtual Execution - Server: Before Release 6.4