interface ＜interface name＞ bridge-group ＜bridge group＞ path-cost ＜path cost＞

Adds a configured path-cost it into a bridge group.

Syntax

<no> interface <interface name> bridge-group <bridge group> path-cost <path cost>

Parameters

no

Removes the path-cost from the bridge group.

interface name

The interface to be used as a bridge.

bridge group

The name of the bridge group.

path cost

The value of the path-cost.

Range: -2147483648 to 2147483647

Examples

The following example sets the path-cost for ether1 in bridge group A to 25:

hostname (config) # interface ether1 bridge-group A path-cost 25

The following example removes the path-cost for ether1 in bridge group A to 25:

hostname (config) # no interface ether1 bridge-group A path-cost 25

User role

Admin or Operator

Command mode

Config

Supported appliances

This command is supported on the following appliances running the specified releases or later: