Sets the bridge-group priority of the ether2 interface.
Syntax
<no> interface <interface name> bridge-group ether2
Parameters
no
Resets the bridge-group priority of the ether2 interface.
interface name
The interface to be used as a bridge.
Examples
The following example sets the bridge-group priority of the interface:
hostname (config) # interface ether1 bridge-group ether2
The following example resets the bridge-group priority of the interface:
hostname (config) # no interface ether1 bridge-group A ether2
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Malware Analysis: Before Release 6.4
Central Management System: Before Release 6.4
Email Security — Server: Before Release 6.4
File Protect: Before Release 6.4
Network Security: Before Release 6.4
Intelligent Virtual Execution - Server: Before Release 6.4