Configures the following parameters for Azure gateway load balancer for inline deployment in virtual Network Security appliances:
internal port
internal identifier
external port
external identifier
Syntax
[no] fe-fastpath vxlan in-port <inPort> in-vni <inVni> ex-port <exPort> ex-vni <exVni>
Use the ‘no’ form of the command to delete the existing configuration.
Parameters
<inPort>
Specify the internal port. Select a value from the range of 0 - 65535.
<inVni>
Specify the internal identifier. Select a value from the range of 800-1000.
<exPort>
Specify the external port. Select a value from the range of 0 - 65535.
<exVni>
Specify the external identifier. Select a value from the range of 800-1000.
Note
The internal and external ports cannot have the same value.
The internal and external identifiers cannot have the same value.
The default VX LAN port cannot be used as an internal or external port.
Example
The following example configures all the ports and identifiers for Azure gateway load balancer:
hostname (config) # fe-fastpath vxlan in-port 10800 in-vni 800 ex-port 10801 ex-vni 80
User role
Administrator
Command mode
Configuration
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Network Security: Release 10.0.2