Upgrades both the system image and guest images on all nodes in an MVX cluster.
Syntax
fenet update cluster <clusterName>
Parameters
clusterName
The name of the cluster to upgrade.
Example
The following example shows a full upgrade on Cluster-Acme. In the example, the system image upgrade is complete on both nodes, and guest images are being downloaded to vx- 2.
cm-1 (config) # fenet update cluster Cluster-Acme cluster update for Cluster-Acme: success, update started Run 'show fenet update status cluster Cluster-Acme' for status cm-1 (config) # show fenet update status cluster Cluster-Acme Cluster Update Status: Cluster: Cluster-Acme Status: in-progress Current operation: image-gi-update Current task: gi-download Percent done: 35.07 % Start time: 2016/07/15 20:23:23.480 End time: ******** Node: vx-2 Status: in-progress Percent done: 56.14 % Task (01/10): image-check Status: complete Percent done: 100.00 % Task (02/10): gi-check Status: complete Percent done: 100.00 % Task (03/10): image-fetch Status: complete Percent: 100.00 % Task (04/10): image-install Status: complete Percent done: 100.00 % Task (05/10): image-rename Status: complete Percent done: 100.00 % Task (06/10): image-boot-next Status: complete Percent done: 100.00 % Task (07/10): gi-download Status: in-progress Percent done: 56.19 % Node: vx-1 Status: in-progress Percent done: 14.00 % Task (01/10): image-check ...
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Central Management System: Release 7.9.0