Installs the latest version of the system image on the MVX cluster and then reboots the system.
Syntax
fenet update cluster <clusterName> system-image
Parameters
clusterName
The name of the cluster to upgrade.
Example
The following example shows a system image upgrade on Cluster-Acme. In the example, the image-check and image-fetch tasks are complete on both nodes, and the image-install task is in progress on vx-2.
cm-1 (config) # fenet update cluster Cluster-Acme system-image cluster update for Cluster-Acme: update started: success Run 'show fenet update status cluster Cluster-Acme' for status cm-1 (config) # show fenet update status cluster Cluster-Acme Cluster Update Status: Cluster: Cluster-Acme Status: in-progress Current operation: image-update Current task: image-install Percent done: 19.28 % Start time: 2016/07/18 18:58:33.168 End time: ******** Node: vx-2 Status: in-progress Percent done: 23.56 % Task (01/07): image-check Status: complete Percent done: 100.00 % Task (02/07): image-fetch Status: complete Percent: 100.00 % Task (03/07): image-install Status: in-progress Percent done: 42.82 % Node: vx-1 Status: in-progress ...
User role
Admin or Operator
Command mode
Config
Supported appliances
This command is supported on the following appliances running the specified releases or later:
Central Management System: Release 7.9.0